| Acworth, New Hampshire | |
|---|---|
| — Town — | |
| Location in Sullivan County, New Hampshire | |
| Coordinates: | |
| Country | United States |
| State | New Hampshire |
| County | Sullivan |
| Incorporated | 1772 |
| Government | |
| • Board of Selectmen | Tom Esslinger Gretchen Abendschein Steven Holt |
| Area | |
| • Total | 39.1 sq mi (101.3 km2) |
| • Land | 38.9 sq mi (100.7 km2) |
| • Water | 0.2 sq mi (0.6 km2) 0.61% |
| Elevation | 1,489 ft (454 m) |
| Population (2010) | |
| • Total | 891 |
| • Density | 22.8/sq mi (8.8/km2) |
| Time zone | Eastern (UTC-5) |
| • Summer (DST) | Eastern (UTC-4) |
| ZIP code | 03601 |
| Area code(s) | 603 |
| FIPS code | 33-00260 |
| GNIS feature ID | 0873525 |
| Website | www.acworth.cc |
Acworth is a town in Sullivan County, New Hampshire, United States. As of the 2010 census, the town had a total population of 891.[1]
Contents |
Originally chartered by Governor Benning Wentworth in 1752, it was called Burnet after William Burnet, a former governor of the Province of Massachusetts Bay. In 1754, however, the French and Indian War broke out, and no settlements were made under the charter.[2] Wentworth regranted the township in 1766, naming it Acworth after Sir Jacob Acworth, an English admiral with interests in Portsmouth shipping.[2] The town was first permanently settled in 1768 by several families from Londonderry.
Acworth was incorporated in 1772 by Governor John Wentworth,[3] but war again slowed its development. With the close of the Revolution, however, Acworth grew quickly. By 1859, it had 1,251 inhabitants, most of whom were occupied in agriculture. The Cold River provided water power for industry, including 5 sawmills, a gristmill, a woolen factory, a bobbin factory and a peg factory. There was also a boot and shoe manufacturer.[2] Acworth is a source for museum-quality crystals such as beryl. The town of Acworth, Georgia was named for this town, because this was the hometown of a railroad engineer there.
According to the United States Census Bureau, the town has a total area of 39.1 square miles (101 km2), of which 38.9 sq mi (101 km2) is land and 0.2 sq mi (0.52 km2) is water, comprising 0.61% of the town. Acworth is drained by the Cold River, and lies fully within the Connecticut River watershed.[4] The highest point in Acworth is Gove Hill, at 1,939 feet (591 m) above sea level.
The town is crossed by New Hampshire Route 123A.
As of the census[5] of 2000, there were 836 people, 318 households, and 234 families residing in the town. The population density was 21.5 people per square mile (8.3/km²). There were 512 housing units at an average density of 13.2 per square mile (5.1/km²). The racial makeup of the town was 96.77% White, 0.84% African American, 0.84% Native American, 0.24% Asian, and 1.32% from two or more races. Hispanic or Latino of any race were 1.08% of the population.
There were 318 households out of which 30.8% had children under the age of 18 living with them, 60.7% were married couples living together, 6.0% had a female householder with no husband present, and 26.4% were non-families. 19.8% of all households were made up of individuals and 7.5% had someone living alone who was 65 years of age or older. The average household size was 2.63 and the average family size was 3.06.
In the town the population was spread out with 25.7% under the age of 18, 4.7% from 18 to 24, 24.0% from 25 to 44, 30.4% from 45 to 64, and 15.2% who were 65 years of age or older. The median age was 43 years. For every 100 females there were 101.4 males. For every 100 females age 18 and over, there were 101.0 males.
The median income for a household in the town was $37,386, and the median income for a family was $41,397. Males had a median income of $29,792 versus $26,912 for females. The per capita income for the town was $18,132. About 10.1% of families and 15.6% of the population were below the poverty line, including 26.6% of those under age 18 and 5.4% of those age 65 or over.
|
|||||||||||||||||